How to Maintain a Tile Roof

How to Maintain a Tile Roof

High quality roofing tiles are durable, and most will last over a century. It is rare to have problems with anything on a large scale unless the roof tiles were installed incorrectly or the tiles are of low quality. And, while you will spend more initially on a tile roof, over time they can be very cost-effective.

Moss and algae won’t eat through a tile roof very quickly, certainly not as easily as with a wood shake roof. And most of the time, tile roof repair is not as urgent in nature as it is for other materials. Because tile roofs are expensive to install, it is much better to repair the tiles than replace the roof.

The most common two problems with tile roofs are cracked or broken tiles and debris buildup.

Cleaning Debris

As with all roof maintenance, keep overhanging trees cut back to reduce shade and debris. This will slow the development of moss and algae and reduce buildup of debris. To inhibit moss growth you can fit a copper wire net to the ridgeline. Water running over the copper will reduce the amount of moss that grows below it. (If you collect rainwater for drinking, do not use this method.)

Build up of moss and debris in the slots between the tiles can cause water to back up under the tiles. When this happens, it can be difficult to determine the source of a leak. Tiles hang on long strips of wood that run horizontally, so water that gets behind the tiles can follow the boards and cause a leak in another area. Valley sections of the roof are particularly prone to this problem, and should be cleaned every year.

Pressure washing is the most safe and effective way to clean moss and algae, and is recommended by the Tile Roof Institute.

Fixing and Replacing Broken Tiles

Tiles can break or become damaged by extreme weather conditions such as high winds or large hail, improper installation or from being walked on. When working on the roof, work on planks or a roof ladder. If you walk directly on the tiles, they will break.

If your roof starts shedding undamaged tiles for no apparent reason, it could be that the installer used cheap galvanized nails instead of copper or stainless steel. In this case, relaying all the tiles with the proper nails is the only solution.

Some tiles can be repaired with silicon sealant or adhesive.

To replace a tile, pry up the tile just above the broken one. Break the damaged tile into smaller pieces and carefully remove them. Pry out nails. Spread a small amount of roofing cement along the underside of the replacement and slide it into place. For a single tile replacement, just the adhesive will be sufficient. Press all tiles down snugly.

Tile Matching

Matching tile on an older roof can be challenging. Roof tile suppliers that carry a large inventory of salvaged roof tile can be your best option. If you can’t find a match, you can take tiles from a less visible part of the roof and fill that spot with the closest match you find. Use the matching tile on the more visible areas. You can also have custom tiles made, but this is expensive and getting an exact match is not guaranteed.

Fixing Metal Flashings

If you have metal flashings that need repair, often you can lift the tiles just around the flashings, replace them and return the tiles. You may also find and replace broken tiles at this time. Whether you do the work yourself or hire a roofer, care is needed when working on a tile roof or you will cause more damage than you repair.

 

A Roof Repair Contractors

A Roof Repair Contractors

 

Most roofing contractors try to prevent potential clients from indulging in roof repair, but push the point that installing brand new roofs are more economical than repairing the existing dilapidated one. But in many cases, damages may be minimal and can be rectified by minor replacements and repairs. Being permanently exposed to hail, storm, heat, rains etc, roofs get spoiled and leaky easily. This makes it important that you get your roof repaired completely in due time, lest your roof may be damaged even more in the next natural calamity. In such circumstances, roof repair contractors come handy.

As roofs cost money, it is not feasible to change your roof at the blink of an eye. But repairing damaged roofs is also full of potholes. Periodical and regular roof repairs are indispensable to keep it operational, emergency roof repair requirements may crop up after every heavy rain, storm, snowfall etc.

Roof repair contractors belong to a different breed from regular roof contractors. Even though they need to fulfill all the criteria stipulated for roof contractors, their job becomes additionally difficult as the materials used and designs formulated need to gel with the existing roof. It is very true that starting with a clean slate is easier than doing corrections in smudged work.

Your damaged roof should be set right and enlisting a roof repair contractor to inspect your property is the first step towards this end. The investigator should look carefully to detect each damaged part, loss of granule, cracks, blocked vents and dimples and note down what he sees. Such detailed analysis helps to arrive at a pragmatic inference. Now you and the contractor can sit down and discuss the fine points of the contract, including costs, timeframe, nature of damages and materials to be used and arrive at a mutually beneficial agreement. The agreement should definitely be put on paper.

Roof repair contractors should have a permanent address and contact number so that you can contact them if need arise. Contractors working out of trucks and temporary hideouts may not prove accountable to you. Check whether he has a current license to operate and valid insurance covering his workers and work. Since roof repair is a constant and recurring phenomenon for every house owner, it is imperative that you rely only on a reputed and trustworthy contractor. It is also advisable to have a permanent repair contractor for your roof, as he would be in a better position to assess and repair damages quickly and efficiently.

 

Overview of Roofing Materials

Overview of Roofing Materials

 

Many people seldom think about their home’s roof until it leaks!

Then, you realize that a roof is one of the most important major components of your home, since a failing roof affects almost all the other components.

And aside from “putting a roof over your head”, there are also aesthetic and safety considerations with the type of roof and roofing products used in home construction.

And you have a lot of choices when it comes to home roofing products; from asphalt shingles to wood shakes, ceramic tile to steel panels and green products like recycled rubber.

So how do you choose the right roofing material for your home? Cost, availability, style, durability, longevity and fire safety are among the criteria you should consider when making a decision on replacing a roof or what type of roofing to use on a new home.

roofing Product Trends

As with most home building materials, roofing products these days are trending toward engineered materials.

One reason for this trend is the ever-increasing cost of natural materials like wood and stone.

Another is that building codes in most regions of the United States now require the use of fireproof roofing materials.

But perhaps the most important reason people are using engineered roofing materials is the return on investment they offer; while the up front cost of installing a roof is one consideration, the service life and maintenance costs must also be factored in order to determine which roofing material provides the best value.

roofing for the Long Term

When factoring roofing cost you have to consider not only the initial cost of materials and labor, but also the total lifecycle cost. An asphalt shingle roof may last 20 years, but a quality slate roof can last as long as 100 years.

Some of today’s engineered metal and cement roofing products come with warranty periods of 40 or even 50 years, so the less expensive roofing product may not in fact save you money over the long haul. Combine this with the enhanced look many of these products offer over asphalt shingles and you may find that it makes more sense to pay the extra up front cost.

When considering durability and longevity of roofing materials, be sure to know what the term and conditions of the manufacturer’s warranty entails and purchase materials from a well known and reputable manufacturer you know will be there should a warranty need arise many years down the road!

Asphalt roofing Shingles

Cheap and effective, standard three-tab asphalt shingles are used on almost 90 percent of all residential roofs in the United States. These products typically have a 20 to 30 year warranty, which can make them a great value.

A slightly upgraded variation on three-tab asphalt is the architectural shingle, which is typically about twice the thickness and is installed in staggered layers to give the roof a more pleasing look. For a modest price increase, the architectural shingle products typically have a 30 year warranty and will add a bit more style to your home.

Ceramic Roof Tiles

Coming from the Mediterranean style of architecture, ceramic tile roofing is quite popular in the warmer climes of the Southwest and Florida. A tile roof is very heavy and requires framing designed to support the additional weight.

Barrel tiles are the most common type of ceramic tile and look like half cylinders, typically about 16 inches in length. Other clay tile roofing products can be shaped like slate tiles or thick shingles, designed to suit other architectural styles.

While any tile roofing product will be more expensive than asphalt, many of these materials will last 50 years or more.

Metal roofing

Metal roofs, formed from corrugated, galvanized sheets, were historically used on sheds, barns and other outbuildings on farms. Depending on the quality and style, a metal roof can be very cheap and long-lasting and are very popular in areas subject to heavy snowfall.

High end metals like copper can be at the far other end of the price equation, giving a custom home a very unique look.

Properly installed and maintained, metal roofing should last at least 50 years.

Wood Shake and Wood Shingle roofing

For many, the look of a traditional wood shingle roof fits a range of home architectural styles. With time, wood shakes weather to a grayish or soft silver tone that helps a home blend in with the natural landscape.

The most common wood shake roofing materials used are Western Red Cedar, Alaskan Yellow Cedar and Eastern White Cedar. Wood shingles are fairly smooth, cut to a uniform thickness, but vary in width. Wood shakes will be rougher and thicker than shingles, since they are split rather than sawn from the wood logs.

A wood roof is meant to breathe and laid over a substrate in order to allow air to circulate behind the shingles or shakes. Traditionally, skip sheathing is used, with wood battens or strips being nailed directly to the roof rafters. Other products, such as plastic or a pressure-treated lattice are sometimes used these days to allow proper circulation under a wood shingle or shake roof.

With the rising cost of wood, changing building codes and fire safety regulations, wood shake and shingle roofing has become very expensive and is less and less commonly used in home construction. Properly installed and maintained, a wood roof can last up to 30 years.

Engineered roofing products are also available now that simulate the look of wood shakes and shingles, made from cement materials with better fireproof qualities and, in some cases, superior durability to real wood and requiring very little maintenance.

Slate and Engineered Slate roofing

In the Northeast slate was used traditionally as a roofing material on high-end custom homes. With a useful life of up to 100 years and excellent ability to shed snow and ice, like ceramic, it is quite heavy and therefore requires proper roof support and structure.

With natural slate being too expensive in most cases these days, manufactured “fake” slate products have become increasingly popular as an alternative. Made from plastic and recycled rubber composites, these engineered slate roofing materials are far more affordable, weigh about a third as much as real slate and can have up to a 50 year warranty.

New Roof Installation: Types of Roofing

New Roof Installation: Types of Roofing

If you are in the market for a new roof installation, then you may want to explore your choices. Unlike 20 years ago, today there are several accessible and affordable roofing options. There are several factors that you should consider when selecting a new roof material:

Budget – Budget is an important determining factor and will help you limit your choices. New roof installations vary according to material.

Longevity – Do you plan on living in your home for many years? If so, then it may be worth the investment to purchase a long-lasting roof type, such as metal roofing. Metal roofing can last more than 50 years (if well maintained), while conventional asphalt shingles last an average of 20 years.

Design – Are you interested in adding curb appeal and value to your home? All new roof installations will increase your curb appeal and home value, however, some roofing types, such as metal roofing can increase your home’s value by an average of 1%-6%. Concrete roofs and metal roofs provide the most design options.

roofing Contractor – Hiring only licensed and reputable roofing contractors will guarantee that your roof is properly installed. Check that the company’s license is valid and that past customers were satisfied.

Types of roofing

Asphalt Shingles
Asphalt shingles are currently the most common roofing shingles used in the United States. There are several color options and choices. Asphalt shingled roofs require lots of maintenance and often experience leaks after a decade or so.

Concrete Roof Tiles
These roof tiles provide natural noise insulation and are common in southwestern states. There are dozens of color choices. Concrete roof tiles are extremely durable. They can last over 50 years, are easy to maintain and are fireproof and resistant to high winds.

Metal roofing
Metal roofing is one of the strongest roofing materials available. Metal roofing includes copper and steel roofing tiles. The style, design and color selection is extremely vast. Metal roofs last a minimum of 50 years without much maintenance.

Solar shingles
Also called photovoltaic shingles, solar roof shingles are photovoltaic cells designed to look like conventional asphalt shingles. The shingles use sunlight and transform it into energy to be used in a home. Solar roof shingles are a new product and are expensive.

Wood Shingles
Wood-shingled roofs were one of the first roofing types used in North America. Today, they are one of the least types of shingles installed. Wood shingles are a fire hazard and require a lot of maintenance. One benefit is that the wood shingles are easy to repair and replace. Wood shingles are popular for cabins, sheds and small country homes.

 

Most Cost-Effective Ways For Roof Repair

Most Cost-Effective Ways For Roof Repair

Roofs get damaged constantly due to a variety of reasons. Since roofs play the role of a protector to your house, they need to be kept spic and span throughout. Regular roof repair can ensure a problem free life both for you as well as your home. Lack of repair may even cause structural damages to the building.

Roof repair, therefore, is a regular requirement. It prepares the owner to meet any unforeseen situations like storms and heavy downpours. As repairs cost money, it is advisable to find ways to do it economically. Using better quality building materials is one such step. It may accrue some initial costs, but such stuff can withstand most assaults than cheap material. The old adage ‘peanuts can fetch you monkeys only’ is highly relevant here.

Secondly, the expertise of the person who evaluates the condition of your roof also plays a direct role in getting your roof repaired economically. It is essential that you do a thorough reality check on your entire roof before endeavoring to fix out the irregularities and damages. Yearly roof repair helps your roof to shine for longer periods.

Hurricanes, hailstorms or heavy showers usually cause unfathomable losses to your roof. Milder elements like snow, sleet and heat can also affect the physical condition of your roof adversely. Therefore, every homeowner has to be mentally prepared always to meet such emergencies. Once the disaster passes away, he should walk around his house and check the roof for visible damages. The annual losses caused by natural forces amounts to several billions of dollars each year. After completing the damage assessment, no time should be wasted in fixing up the damages. Any delay here may put you in trouble if some other unpredictable calamity strikes immediately afterwards.

The emphasis in both periodical roof repair and emergency repairs should be to get the job done perfectly and without wastage of money, time and energy. A well-versed roof repair contractor would be able to point out all the defects in your roof and provide suggestions on how to repair them. Greenhorns and storm chasers should be avoided at all costs. It is also advisable that you try and build a long-standing relation with a roofer who has a good reputation on expertise and dedication. This would cut down costs even further.

 

Seven Things to Check Before Hiring a Roofing Company

Seven Things to Check Before Hiring a Roofing Company

Repairing or replacing a roof is a big job that needs to be done right. After all, your house depends on a sturdy, quality roof to protect it from the elements. Any leaks resulting from poor workmanship can lead to a disaster inside your home. Don’t take chances. Check roofers thoroughly before hiring them.

1. Licensed and Insured

At the bare minimum, a reputable roofing company needs to carry the right amount and type of insurance. Liability and worker’s compensation are especially important. If a worker is injured on the job, the company needs to cover medical costs. In most states, roofers also need to be licensed. In some regions, licensing is done at the city level instead, so be sure to check your local requirements.

2. Quality Craftsmanship

To check the quality of work done by a particular company, ask which homes they’ve worked on in your area. Take a look at some of these locations to inspect the quality of the roof. In addition, ask for references. Call a few and ask about the work completed. It’s also a good idea to check the company’s rating with the Better Business Bureau or similar consumer protection organizations.

3. Strong Materials

Your roof needs to hold up well against the elements, including powerful winds, hail, high heat, and heavy, wet snow. Find out what materials each potential roofing company plans to install on your roof. Research these products to learn about their durability and if they are a good fit for your environment.

4. Good Communication

When you talk to prospective roofing companies, how well do they communicate with you? Do they answer your questions in detail? It’s important to have excellent communication throughout the entire roofing process to ensure everyone is on the same page. If your questions aren’t answered to your satisfaction, it could be a red flag.

5. Knowledgeable Staff

Find out what training your roofers have received. Check how many years the roofing company has been in business. Is the company experienced in the type of roof you want? How many roofs have they installed, repaired, or replaced? Is the staff able to offer sound recommendations based on experience? You’ll want to hire a knowledgeable team that knows what they’re doing and will communicate with you clearly.

6. Written Guarantee

Be sure to get a written guarantee. You’ll need to be protected in the event of any problems with the installation or materials. The guarantee should be clearly specified as part of the contract you sign with the company. Have the roofing representative fully explain the agreement, and read it over carefully before signing to make sure it matches what you’ve been promised.

7. Ongoing and Post-job Cleanup

The job can take several days, or in some cases weeks, to complete. Ask about end-of-day and end-of-job cleanup efforts. It’s important that the area is livable, safe, and clean throughout the project. At the end of the job, you’ll also want a clean site to go with your brand new roof.

 

How To Find A Good Roofer in 5 Easy Steps

How To Find A Good Roofer in 5 Easy Steps

Whether you are choosing a company to construct a roof for a brand new home or you are trying to fix and replace parts of a roof damaged in an unexpected and devastating storm, you need to take the decision of who to hire very seriously. The construction of a roof takes the expertise of professionals who take pride in their work. Leaving this important job to anyone with a pickup truck and a hammer could have you dealing with much more serious issues in the very near future. How can you find a quality and dependable roofing contractor? We have you covered, literally and figuratively. Here is how to find a good roofer in 5 easy steps.

1. Choose a local contractor.

The best way to get a feel for what type of job you are considering paying for with your hard earned money, is to take a look around your neighborhood. Do you see quality work? Are there a few roofs that catch your eye? Perhaps a metal sheet roof or bright Spanish tile roof has caught your attention. Do some research around your community and ask who did those roofing jobs. You are most likely going to find a local contractor that takes pride in the work they do and who has a very positive and established reputation in the area.

2. Check the reviews and testimonials.

Today businesses know that the best advertising is positive reviews and word of mouth referrals. Professional contractors not only complete quality work but they do so while cultivating a great hassle-free customer experience. Go online and find some reviews from your favorite search sites and read the reviews from similar customers as yourself. If you find reoccurring themes that seem troublesome consider that as a red flag. However, if you find the business reaching out and apologizing for small mistakes, taking care of customers, or simply racking up amazing five star reviews, consider them for your roof job.

3. Decide on quality instead of price.

While we do enjoy the lower prices that competition brings, not all extremely low prices are bargains. Avoid the business that literally pulls up in a truck with a few tools offering to complete the same work for a cheaper price. All too often these contractors cut corners or use sub par materials to get their work done faster and cheaper. This can result in shoddy work or worse yet, necessitate repairs soon after the work is complete.

4. Stay away from pushy salesmen.

A good contractor prides themselves on their work and fulfilling a necessary role for their community. Pushy salesmen not only fail to combine the proper services with the right customers, but may actually fail to deliver a quality service in the first place. They don’t have the foresight to create a strong reputation which may allude to the motive that they don’t plan on being around too long. All too often these contractors want to get in and get out before you have time to realize how inadequate their work is.

5. Choose well written contracts and clear expectations.

A good roofing company has everything to gain from communicating clearly with their customers. Satisfaction is all about ease of transaction, quality service, and adhering to the agreement, or written contract. A roofer should be willing to meet your needs at a fair price while meeting clear policies and expectations, and following all rules and regulations. If this process is rushed or feels inconsistent you may want to consider choosing another company.

Choosing a contractor for your next construction job or roof repair doesn’t have to be stressful and confusing. Use these 5 tips to help get you started finding the best fit for your needs.

 

Signs That It Is Time to Replace or Repair Your Modified Bitumen Roofing

Signs That It Is Time to Replace or Repair Your Modified Bitumen Roofing

Modified bitumen roofing is durable, weather resistant, and easier to repair and install than other types of roofing. It can also be more cost effective. However, it does require periodic maintenance to keep it working for as long as possible. A damaged roof can expose your property to weather and UV damage.

Here are a few signs that it may be time to call your local roofing repair specialist.

Worn Asphalt

When the modified roofing installation is done, asphalt Is used to hold the various layers of material together. Sometimes the asphalt wears away in a spot, exposing the protective layers below. This can allow moisture to seep through, and cause expensive water damage.

Slipping and Delaminating

Normal weather cycles of heating and cooling can cause the asphalt adhesive to delaminate. This can cause the individual membranes to slip, which can lead to seepage and moisture damage.

Tears, Holes and Cracks

Tears and holes can appear in your roofing due to normal weather cycles, damage from animals and birds, debris from storms, falling trees, and countless other sources.

Deterioration to Old Repairs

If you’ve had repairs done to your original modified roofing installation, you will want to check these periodically. Typically, the materials used to make repairs are not the same quality as the original materials. These patch jobs can deteriorate faster than the rest of the roof, leaving you exposed.

Loosening or Lifting Fasteners

Due to the natural expansion and contraction of the roofing material from heat and cold, it is not uncommon to find loosening or lifting fasteners. This can cause danger of sliding and falling shingles. Sometimes, when not checked frequently, fasteners can actually pop out altogether.

Debris and Pools of Moisture

Collected debris and pools of water can compromise the integrity of your bitumen roofing. Debris can block drains, allowing moisture to collect. This puts your roof at risk of structure failure.

Grease

If your property houses a restaurant with a roof vent, maintenance can be even more important. Grease can actually deteriorate some layers of the roofing membrane. Repairs will also be difficult, as most sealants will not adhere to a greasy surface. Equipment should be maintained and cleaned frequently to avoid problems.

Installation Errors

Errors during the modified roofing installation may not be obvious at first. As time goes by however, complications may occur that can only be caused by installer mistakes. Things like substandard materials used, missing supports, not enough sealant in some spots, improperly installed materials, and many other possibilities can rob your roof of useful years without the proper vigilance.

Modified bitumen roofing lasts up to 15 – 20 years. To prolong the life of your roof as much as possible, you should check it yourself at least once a year, preferably at the end of the winter season.

If you do find signs of damage, contact your local Commercial Roofing repair specialist for a professional inspection.

 

Four Short-Term Effects Of Neglected Roof

Four Short-Term Effects Of Neglected Roof

A majority of building owners neglect repairing their roofing system as they believe by doing so they’re saving money, effort, time, or something else. The problem here is that they’re only considering only the short term while making this type of decision, and probably not even considering the temporary effects. Let me tell you that delaying on repairing your roof has both short & long-term impacts. In this article we will have a look at what are the short term impact of neglecting your roof repair.

Short-Term Effects of Neglected Roof:
Leaks: The first negative effect of ignoring your roof repair is that it will start to leak, and it will only get worse if not fixed in time. Leaks don’t block themselves; they in fact contract themselves and allow more water get through. If you’ve multi-layered roof, you mayn’t notice that water is getting into the building unless you get on the roof and examine the roofing surface. Even petite blemishes in the roof that are seen but overlooked can guide to a seeping roof.

When you notice even a small leak, try to repair it immediately yourself or call for a professional roof leak repair right away.

Increased power bills: Another temporary impact of ignoring your roof is amplified power bills. The same opening that allow water pass through also let the cold air out during the summer and hot air out throughout the winter months. By enabling holes to subsist in the surface of your roof without fixing them, you may be paying considerably more in terms of your electricity bill each single month.

Mold: Blocked gutters, damp insulation, and a damp roof layer can encourage mold to grow which is pretty risky for the personnel in the building. Dealing with mold issues can be pretty costly once it starts to develop.

Check & clean your gutter system in regular interval and also make sure that no insulation is uncovered to the elements. Furthermore, check regularly to make sure that your roof don’t have any leaks. By doing these 3 things, you will be in a great position to stop mold from getting into your property.

Animal & pests: The final temporary effect of ignoring your roof is the danger of becoming plagued with pests and animals in your roofing system. If your room has been damaged badly and the holes are quite big, you could notice large rodents, insects and other creatures such as raccoons getting into your home via the roof. Relying upon what type of access they can find, you might pretty quickly have an entire family of pests inhabiting on your roofing system.

Conclusion:
So, it’s very essential that you always be on the search for roof failures and any indications of damage that requires to be fixed. When your discover these things, you must seriously take into account making the repairing as quick as possible. Don’t let one problem bring another one. Fixing the first roofing problem right away can save you considerable money in the long run.

 

Residential Steel Roofing- For Stylish Roofs

Residential Steel Roofing- For Stylish Roofs

roofing is an important part of any construction, whether it is for commercial or residential purpose. Proper roofing not only gives a beautiful finish to a building but also plays a major role in controlling the temperature in the building. Choosing the ideal material for roofing is an important task. Nowadays there are many materials to choose when one is looking for options in residential steel roofing. The steel roofing is easy to install and is ideal for new constructions as well as for in situations where existing residential structures are remodeled. The steel roofing available for residential buildings are of high quality and so, are extremely durable.

The steel roofing adds to the strength of the residential building, and looks just as new even after years of use. It is available in a wide range of colors and shades. Thus, one can choose suitable roofing options that suit the design and exteriors of the building. The steel roofing can also be installed for residential buildings of different architectural styles. It is quite cost effective, and can be installed quickly in any residential project. The steel roofing adds a beautiful finish to the residence and is quite easy to maintain. As the roofing uses high quality steel, the roofing features adds to the effectiveness of the roof against various environmental factors such as rain and wind.

Many companies offer their dedicated roofing services for residential, commercial, and industrial buildings. Any Dallas roofing company is quite professional, and so ensures that the projects are completed within the scheduled time, which is very convenient for the residents. They provide accurate estimates, and deliver comprehensive services like roofing maintenance and repair, in addition to installation. The roofing companies are experienced in handling a wide range of roofing projects, and make use of quality materials, which add to the overall quality of their work. The roofing companies hire qualified and experienced contractors, engineers, and installation crews.

The roofing contractors inspect every project in detail, and pay attention to the areas of the roof that require repair or replacement. The metal roofing contractors also pay attention to the roofing requirements of the clients, and advise the necessary solutions to handle the roofing issues. One can search the internet to find more information about the various companies that offer roofing services. The websites of the companies are quite informative and offer the necessary details about the different services offered. One can even contact the companies directly for resolving the various roofing issues.