Advantages and Maintenance of Flat Roofs

Advantages and Maintenance of Flat Roofs

Sloping roofs are more common in North America; however flat roofs are fast gaining in popularity due to the various benefits they offer homeowners. Flat roofs are not entirely flat, in fact, they look horizontal or nearly horizontal, but they do have a slight slope of usually 10 degrees, to drain of the water and snow. Flat roofs have been around for centuries and the old technology of using asphalt compounds to deflect water was being used until thirty years ago.

Traditionally, gravel and tar was the preferred material and it was sufficient to prevent leakages so long as water was not allowed to sit and accumulate on the roofs. This system had its limitations in colder climates, as ice dams would block the flow of water resulting in pooling of water on the roofs and home owners had to deal with leaks very often.

With the advances made in rubber technology especially synthetic rubber technology coupled with the explosion in the polymer industry, newer products for roofing began to appear about 40 years ago. The use of these products enabled homeowners to be unconcerned about rains and snow. Today flat roofs are made from different materials and substances such as Asphalt built up roof or BUR, Hypalon Chlorosulfonated Polyethylene (synthetic rubber), TPO-Thermoplastic Polyolefin, EPDM-Ethylene Propylene Diene Monomer, PVC-Polyvinyl Chloride, and Modified Bitumen.

One common feature of all flat roofs is that they always have a coating over some sort of base. Flat roofs require regular inspection and preventive maintenance to extend their life. Modern architecture would not be the same without flat roofs. Residential buildings are more suited for flat roofs as compared to industrial or commercial buildings. This is because flat roof becomes unstable with increase in size leading to higher maintenance expenses.

Life of a flat roof depends on the material used in its construction and the frequency of preventive maintenance. It is recommended that flat roofs be inspected once in a year. Cleaning and clearing of debris from the drains is carried out regularly to prevent water logging and easy draining. Roof coating, which is responsible for waterproofing, degrades due to the ultra violet rays and hence needs preservation. Poor maintenance of flashings material used around objects that protrude from a roof such as chimney is the main cause of leakages in flat roofs.

Owning a flat roof has many advantages such as:

Flat roofs are more accessible making it easier to inspect and clean.

Adds to usable space. If strong enough, it can be used as a terrace garden or as an outdoor amenity. Flat roofs also reduce dead space that is common feature of sloping roofs.

Cost of construction is significantly lower than traditional sloping roofs, resulting in substantial savings that can be set aside for future contingencies or diverted to other home improvement projects.

Cheaper second floors can be built on homes already having a flat roof.

Flat roofs not only reduce initial cost but also add value to your homes

However it is wise to consider a few disadvantages of flat roofs:

Flat roof coatings are not everlasting

Consistent maintenance is required

Not all buildings are suitable for flat roofs

If you’re unsure as to whether flat roof is ideal for your home, it is advisable to consult roofing experts before taking a decision.

 

Modern Metal Roofing Materials

Modern Metal Roofing Materials

A growing trend in the home roofing industry these days is the metal roof. With qualities of light weight, durability and fire resistance, there are various metal roofing materials and systems to consider.

Some of the newer metal roofing materials are even designed to give your roof the look of wood shakes or slate tile. A wide variety of metal roofing systems is available on the market today.

Types of Metal roofing Materials Used

The primary metals used to make metal roofing materials include aluminum, steel, stainless steel, copper, and zinc alloys. Each metal roofing material has unique properties that affect its appearance, durability and price.

Heavier and more durable than aluminum, steel is a popular choice for metal roofing. Coated with zinc and sealed to provide a finish that protects it against rust and corrosion, a modern steel roof, installed properly, can last fifty years or longer.

The coatings typically consist of a bottom coat of epoxy primer, which provides additional adhesion, and an acrylic top coating, which is baked on to add protection and color that will withstand harsh sunlight, rain, snow and ice.

Stainless steel is another popular, but more expensive, metal roofing material that is highly resistant to rust and corrosion. A Terne coating may also be used to give stainless steel roofing material a more natural, matte-gray finish.

Aluminum roofing materials are extremely lightweight, making them another choice for home roofing. While aluminum doesn’t rust, it does need to be painted or coated to provide a more attractive appearance. The coatings used on aluminum roofing are similar to those used on steel roofing materials.

Copper has been used as a roofing material for centuries and offers a rust-free surface that is naturally resistant to scratching or peeling and develops a natural patina with time that is quite attractive. However, copper is extremely expensive and thus, less commonly used as a home roofing material these days.

Metal roofing Finishes

As described above, metal roofing materials often have a factory-applied protective layer applied in order to provide superior protection from the elements and to give the materials a more attractive appearance. The type of coatings used varies by manufacturer, the metal used and the desired look to be achieved in the final product.

Metal roofing materials may also be left uncoated in some cases, giving it a naturally weathering appearance and is more commonly found in metal shingles or shingle panels made from aluminum, copper, zinc or stainless steel.

Galvanized steel can also be used in manufacturing metal shingles or shingle panels, with a factory-applied paint system used to bake on a protective coating using fluoropolymers, producing a metallic-coated carbon steel roofing material.

 

Other types of coatings used on metal shingles and shingle panels include epoxy and ceramic granules or crushed stone chips, used to achieve the appearance of stone and further protect the metal roofing material.

Types of Metal roofing

Structural and non-structural, or architectural metal roofing materials are the two basic types of metal roofing in use today for residential purposes. Structural metal roofing is attached directly to lathe boards or purlins and doesn’t require solid sheathing underneath; the roofing material adds rigidity and integrity to the structure of the roof, thus its name.

On the other hand, non-structural metal roofing does require a solid substrate underneath, in which case oriented strand board, a metal roof deck or plywood sheathing is used.

Metal roofing has evolved substantially with new technologies and systems being introduced over the last twenty years. Where corrugated metal roofing with its heavy and unsightly waving ridges, was once used for sheds, barns and commercial-type outbuildings, today’s metal roofing materials have improved greatly in terms of durability and appearance.

Two primary types of metal roofing systems are most commonly used today; standing seam roofing systems and metal roofing “shingles”. Within each of these two types, there are many variations and each manufacturer offers its own metal roofing systems.

Standing Seam Metal Roofing Systems

Standing seam metal roofing materials have been used on barns and industrial buildings for decades, but more recently, these systems have evolved and improved to become more attractive and popular for residential use.

Made using a roll-forming manufacturing process, standing seam roof panels have a seam at one end and a lock on the other end, so that they interlock with clips for easy installation and a clean, attractive look. Seams where the roof panels are joined will be turned up, making them higher than the roof’s drainage level, providing excellent water-tightness and snow shedding capabilities, which makes them most popular in mountainous locations.

A standing seam roof does require additional labor versus other types of roofing systems, since the panels must be custom cut to properly fit the dimensions of a home’s roof. But the distinctive look and excellent durability have made standing seam metal roofing systems increasingly popular.

Metal Shingle Roofing Materials

At the other end of the metal roofing materials spectrum are individual shingles made from metal, but designed to simulate the look of wood or asphalt shakes or clay, stone or slate roof tiles. In many cases the shakes or tiles are formed into multi-shingle panels for easier installation.

The advanced coating and painting processes used today enable a wide variety of colors, textures and styles to be achieved with metal roofing shingles. Metal shingles are available in steel, copper, zinc, aluminum and stainless steel materials.

The 5 Top Materials For Metal Roof

The 5 Top Materials For Metal Roof

roofing of metal is largely adopted by those who live in the areas having intense cold. This form of roofing is also chosen by people, who live in hot climate. The variety of materials for roofing of metal makes this roofing highly popular among its users from all corners of the world. Take a look at this offer a wide range of roofing with a high standard of service that can cover your needs.

The types of materials available for roofs of metals

There are several types of metal roofing available. Depending on the requirements a choice can be made. There are so many materials available for metal roof. All of them bring a mixture of longevity, strength and flexibility. So, let’s check out what are these types.

Zinc for metal roof

It is one of those metals of metal roofing which have the quality to convert into utilizable materials. Architectural zinc is 100% recyclable and it lowers the use of energy in further manufacturing. Zinc hydroxyl-carbonate is a protective layer which is developed by the Zinc. This layer blocks the chemicals and moisture penetration. In case this layer is pierced, then the hydroxyl-carbonate will modify over time and make the zinc corrosion resistant naturally. When the flexibility, versatility and malleability of zinc combined with this factor, it becomes the material of choice.

Tin

Another material is tin which is also known as the Terne or Terneplate. It is one of those metals which has flexible character and is treated with the coating of tin and lead. If it is installed properly, then it will last up to 50 years.

Aluminum

This is the material which is increasingly becoming popular these days. Since it is corrosion resistant and requires minimum maintenance people started adopting it more. It is a better heat reflector than steel. Thus, it keeps the house cooler. It can last for about 35 years. Those who live in hot areas can go for this metal.

Galvanized steel

It is a wonderful and an economic roofing material that lasts for more than 60 years. It is made up of alloyed steel with a shielding zinc coat. Also, it is exceedingly rust-resistant.

Copper

It is the material which lasts the most among all the other roofing materials. Still, you hardly found a house having a copper roof. It is so because it demands lots of maintenance and also tough to obtain. But, if you find it and ready to maintain it, then this is unbeatable.

These were some of the metals which are used in metal roof. Depending on the requirements and the area of living, it can be finalizing that which one would be the best for your house. Also note that the price of installing all of them is different from each other.

 

Overview of Roofing Materials

Overview of Roofing Materials

Many people seldom think about their home’s roof until it leaks!

Then, you realize that a roof is one of the most important major components of your home, since a failing roof affects almost all the other components.

And aside from “putting a roof over your head”, there are also aesthetic and safety considerations with the type of roof and roofing products used in home construction.

And you have a lot of choices when it comes to home roofing products; from asphalt shingles to wood shakes, ceramic tile to steel panels and green products like recycled rubber.

So how do you choose the right roofing material for your home? Cost, availability, style, durability, longevity and fire safety are among the criteria you should consider when making a decision on replacing a roof or what type of roofing to use on a new home.

roofing Product Trends

As with most home building materials, roofing products these days are trending toward engineered materials.

One reason for this trend is the ever-increasing cost of natural materials like wood and stone.

Another is that building codes in most regions of the United States now require the use of fireproof roofing materials.

But perhaps the most important reason people are using engineered roofing materials is the return on investment they offer; while the up front cost of installing a roof is one consideration, the service life and maintenance costs must also be factored in order to determine which roofing material provides the best value.

roofing for the Long Term

When factoring roofing cost you have to consider not only the initial cost of materials and labor, but also the total lifecycle cost. An asphalt shingle roof may last 20 years, but a quality slate roof can last as long as 100 years.

Some of today’s engineered metal and cement roofing products come with warranty periods of 40 or even 50 years, so the less expensive roofing product may not in fact save you money over the long haul. Combine this with the enhanced look many of these products offer over asphalt shingles and you may find that it makes more sense to pay the extra up front cost.

When considering durability and longevity of roofing materials, be sure to know what the term and conditions of the manufacturer’s warranty entails and purchase materials from a well known and reputable manufacturer you know will be there should a warranty need arise many years down the road!

Asphalt roofing Shingles

Cheap and effective, standard three-tab asphalt shingles are used on almost 90 percent of all residential roofs in the United States. These products typically have a 20 to 30 year warranty, which can make them a great value.

A slightly upgraded variation on three-tab asphalt is the architectural shingle, which is typically about twice the thickness and is installed in staggered layers to give the roof a more pleasing look. For a modest price increase, the architectural shingle products typically have a 30 year warranty and will add a bit more style to your home.

Ceramic Roof Tiles

Coming from the Mediterranean style of architecture, ceramic tile roofing is quite popular in the warmer climes of the Southwest and Florida. A tile roof is very heavy and requires framing designed to support the additional weight.

Barrel tiles are the most common type of ceramic tile and look like half cylinders, typically about 16 inches in length. Other clay tile roofing products can be shaped like slate tiles or thick shingles, designed to suit other architectural styles.

While any tile roofing product will be more expensive than asphalt, many of these materials will last 50 years or more.

Metal roofing

Metal roofs, formed from corrugated, galvanized sheets, were historically used on sheds, barns and other outbuildings on farms. Depending on the quality and style, a metal roof can be very cheap and long-lasting and are very popular in areas subject to heavy snowfall.

High end metals like copper can be at the far other end of the price equation, giving a custom home a very unique look.

Properly installed and maintained, metal roofing should last at least 50 years.

Wood Shake and Wood Shingle roofing

For many, the look of a traditional wood shingle roof fits a range of home architectural styles. With time, wood shakes weather to a grayish or soft silver tone that helps a home blend in with the natural landscape.

The most common wood shake roofing materials used are Western Red Cedar, Alaskan Yellow Cedar and Eastern White Cedar. Wood shingles are fairly smooth, cut to a uniform thickness, but vary in width. Wood shakes will be rougher and thicker than shingles, since they are split rather than sawn from the wood logs.

A wood roof is meant to breathe and laid over a substrate in order to allow air to circulate behind the shingles or shakes. Traditionally, skip sheathing is used, with wood battens or strips being nailed directly to the roof rafters. Other products, such as plastic or a pressure-treated lattice are sometimes used these days to allow proper circulation under a wood shingle or shake roof.

With the rising cost of wood, changing building codes and fire safety regulations, wood shake and shingle roofing has become very expensive and is less and less commonly used in home construction. Properly installed and maintained, a wood roof can last up to 30 years.

Engineered roofing products are also available now that simulate the look of wood shakes and shingles, made from cement materials with better fireproof qualities and, in some cases, superior durability to real wood and requiring very little maintenance.

Slate and Engineered Slate roofing

In the Northeast slate was used traditionally as a roofing material on high-end custom homes. With a useful life of up to 100 years and excellent ability to shed snow and ice, like ceramic, it is quite heavy and therefore requires proper roof support and structure.

With natural slate being too expensive in most cases these days, manufactured “fake” slate products have become increasingly popular as an alternative. Made from plastic and recycled rubber composites, these engineered slate roofing materials are far more affordable, weigh about a third as much as real slate and can have up to a 50 year warranty.

 

Roofing Riddle: Repair, Replace or Recover?

Roofing Riddle: Repair, Replace or Recover?

Maintenance and engineering managers confronted with a problematic roof have a difficult decision to make. Is the best option to repair the existing roof, leave the existing roofs in place and install a new roof over it, or remove and replace the existing roof? The answer depends on several factors that managers must consider before making a decision.

The right decision can result in reduced risk to employees and operations, efficient use of funds, and long-term roof performance. Making the wrong decision, in addition to being stressful, can result in the opposite; premature roof failure, unplanned expenses, increased risk to employees and production, and possible building code violations.

How roofs fail

Roofs seldom fail suddenly, and few failures are major collapses. Failure generally occurs as a result of a series of small progressive events, including: general neglect and abuse; roof traffic that results in punctures and damage; changing weather conditions that create thermal stress at seams and flashing details; chemical contaminants that cause deterioration; and sunlight that delivers heat and ultraviolet (UV) light and cause roofing materials to deteriorate.

Maintenance crews can easily fail to notice these situations, allowing water to enter the roof system damaging insulation, roof decking and interior spaces. If the existing roof system includes a vapor barrier or has a second roof installed, water that enters the roof system might be trapped, damaging system components even though it is not leaking into the facility.

These situations can result in premature failure of the top roof. Although each system is different, they share deficiencies that can result in the need for repairs or potential failure: leaks, standing water, shrinkage, blisters, splits, punctures, wrinkles, protruding fasteners, and surface deterioration.

Factors to Consider in Roof Repair, Recover and Replace Decision

Managers can not turn to a book that tells them when to repair, recover or replace a roof, so they need to consider several essential factors in making this important decision:

The roof’s potential design service life. Knowing the type of roof system and application method, the general quality of the installation, climatic conditions, and the roof’s service requirements can help determine the potential design service life.

The potential deterioration curve. By knowing the potential design service life, present age, and condition, a manager can determine approximately where the roof is along the deterioration timeline.

The nature of leaks. Crews can repair isolated leaks in the field, along perimeter edges and penetrations if they can identify them before they cause significant damage. But if the leaks are systemic or difficult to prevent, repairing the leaks might only be a temporary fix.

Risk. Roof condition is only one aspect of the prioritization process. Managers also need to consider the way the decision to repair, recover or replace the roof will impact building occupants, facility operations, and long-term roof performance. In many cases, risk and the potential cost associated with that risk can be the driving factors for repairing, recovering or replacing a roof.

Life-cycle costs. Managers can use a life-cycle model to make a decision on whether to repair, recover or replace a roof. To ensure the results are as beneficial as possible, managers must be sure to base their assumptions on objective, sound information.

Important Factors for Managers to Consider in roofing Dilemma

Repair. If a roof system has been properly designed and installed, the most cost-effective option is almost always to maintain the roof, make timely repairs and plan for future replacement. If the roof system is in good condition with limited wet insulation and substrate issues, repairing the roof is a viable option.

Managers are often surprised by the amount of damage that can result from roof traffic and newly added penetrations if crews do not identify and repair them in a timely manner. Training external contractors and internal staff to properly care for roofs while performing rooftop work can significantly reduce ongoing roof damage.

Recover. Leaving an existing roof in place and recovering it with a new roof offers many advantages. It is a lower-cost option than replacement, since it does not require removal. The project’s duration also is reduced, limiting construction risk to the facility and operations. The process of recovering a roof typically is less likely to result in water or debris entering a facility. Finally, as sustainability continues to be a high priority, recovery results in less construction material entering the landfill.

Based on these factors, it is easy to decide to recover. But managers must consider several issues before selecting a recover as a viable option:

How much moisture does the roof system hold? If 40 percent or more of the roof insulation is wet, replacement is typically the most cost-effective option.
Will it be cost-prohibitive to modify rooftop equipment and flashings to meet current building codes?
Can the existing structure support the additional weight of a second roof?
How many roofs are in place? Building codes allow for two roofs before replacement is required.
Do insurance restrictions affect the decision?

Replace. If a manager opts to replace a roof, most likely it is due to a history of roof leaks and moisture in the roof system. In some cases, a roof might have been leaking for years. Moisture trapped in a roof requires replacing the wet insulation and can result in an undetected damaged roof deck and structural components. If a roof is recovered without removing the trapped moisture, it can result in reduced insulation value and long-term damage to the roof deck and other system components.

Fine-tuning the decision

Finally, insurance requirements or building code can affect the decision. Insurance carriers may limit the amount of insulation that can be added to a recovered roof impacting the ability to meet energy code. If the building code requires adding insulation to the roof, managers must be sure rooftop equipment and flashing heights allow the additional insulation without the need to raise them.

Raising equipment and flashing heights is costly and in some cases is required to receive a manufacturer’s warranty. In some situations, if adding insulation to meet building codes requires extensive modifications to adjacent roof-related components, such as door thresholds and masonry through-wall flashings, the manager can request a variance from authorities having jurisdiction or the property insurance carrier. The most comprehensive approach is to completely remove the existing roof, enabling inspectors to identify all hidden issues prior to replacement.

No hard and fast rule exists when it comes to deciding whether to repair, recover or replace a roof. Managers and their organizations do not have unlimited budgets, so it is typically a trade-off between risk, performance and cost. Having accurate and objective information on a roof’s condition and the accompanying risk provides the foundation for managers to make the best possible decision based on their specific situation.

House Roofing Materials

House Roofing Materials

While constructing a home, the roofing is very important. Without proper roofing, the home will not be complete. There are several companies which give roofing services to the homes at a very reasonable cost. The material used for roofing is very important for the homes to be tolerant of natural calamities.

While selecting the company for your house roofing, it’s very important to know the nature of material used by the company for roof construction. All materials are not suitable for constructing house roofs. The main intention of any roof constructing company is to give satisfaction to the customers. The 24×7 customer care centre of the companies work all the time and they will be there at the place where the person has given his address. The company undertakes the re-roofing plans of homes also. The homes that are constructed once get damaged due to several reasons and those damaged roofs can be replaced by the new roofs. Replacing the old roof needs to remove the remnants of the old roof first.

Removing the old roofing of the home is needs some skills. The damaged roof pieces are to be removed carefully so that it will not damage the building walls in any way. This is once again a challenging task and needs a lot of skills. The professionally trained staff of house roofing agencies will solve the problem with great skills.

There are several materials used for construction of the roofs. Each material has its own advantages as well as disadvantages. In the olden days, the dried leaves of coconut and areca nut trees, which were properly knitted together to make mats, were used. Those roofs were of very low cost and kept homes cool during hot hours of summer, but the disadvantage was that they were easy victims to termites and fire mishaps. Hence they have become completely obsolete these days.

Tiles made of clay material are used even today. Since they are made of natural materials, they are much cheaper than many other materials and they too keep the inside of the home cool during summer. They are highly resistant to heat and rainwater. They are also not easily combustible. Hence they are preferred over the coconut and areca nut roofs. Despite several new and attractive tile materials which are invented today, clay tiles have not lost their popularity these days.

There are several roofing companies all over the world which provide roofing of the material of choice of the customer. Several different kinds of roofing materials are compared for their different qualities and the best one is chosen among them. Metal roofing materials are also available these days, but despite having several other advantages over other materials like low cost, fireproofing, water resistance etc, they are not the best choice of roofing material available because they make the inside of the home hot by trapping the heat inside. Metal roofs become quickly heated compared to other materials because of their high conductivity of heat and the inside of the home gets heated up. So it is better to avoid the metal roofing as far as possible.

Thus considering the different aspects of several roofing materials, the clay tiles seem to be the best materials for house roofing.

 

Metal Roofing Materials Offered by Reliable Roofing Company

Metal Roofing Materials Offered by Reliable Roofing Company

Individuals these days go for various styles of material for roofing construction work. The design is essentially to add to the excellence of our rooms. roofing framework should be possible in two routes, in particular with metal roofing materials or tile roofing. One of the shocking amendments was the metal material that gave a totally distinctive look to the house. I suspected that he more likely than not contributed a great looking sum for the ridged metal material; however, when I heard the metal material costs and its advantages, I couldn’t trust my ears and arranged one for myself as well.

You need a top to bottom information of the item to understand its cost. Metal rooftops, these days, don’t bear that antiquated look. They have clear hues and are available in different styles. In any case, these are not by any means the only viewpoints that will matter in deciding the cost of the materials. You have to check different components like the life span of the rooftop, and so on. Give roofing construction company a chance to deal with every one of these elements one by one.

It is not required to specify the commitment of the rooftop territory in expanding the cost of the metal rooftop. The bigger the rooftop territory more is the cost. It is by and large ascertained on a for every square foot premise. The aggregate metal rooftop board cost will be a result of the per square foot expense of the metal rooftop board, increased by the rooftop range. In the later past, new metal roofing materials have been presented in the business sector. These materials are significantly more solid, heat proof and have preferable radiation reflection properties over the customary materials that were utilized as a part of the past. The materials are by and large blended creations of steel and aluminum. Copper and other metal combinations are additionally utilized at times. It is additionally a typical pattern that metal rooftop material producers, these days, make materials with an assortment of manufacturing plant completed granulated stone top coats.

Of the considerable number of materials that are utilized for metal material, copper is maybe the costliest. The expense of amalgam materials utilized for metal material relies on upon the kind of metals utilized. Nonetheless, aluminum is the most utilized material for material. Its non destructive nature is the thing that makes it a perfect material for metal material. Be that as it may, the metal material expense for introducing steel or aluminum metal rooftops increments, since they require additional covering material. Check for the life span and toughness of the material. Copper, steel and aluminum are the strongest materials. Be that as it may, in the event that you are utilizing a combination, do affirm about the strength of that material, from an expert metal roofing materials administration supplier.

 

Roof Leak: DIY or Call “the Guy”?

Roof Leak: DIY or Call “the Guy”?

There is nothing worse than noticing a leak in your roof. There might have been a recent storm that caused immense damage or your might have shingles on your roof that finally wore out and resulted in a noticeable leak. No matter what the cause of your roof leak was, you need to know how to correct the issue effectively.

When you are dealing with a roof leak of any type you do not have a lot of time to waste. The longer you wait the bigger the leak will become and the more damage will occur to both your roof and the interior of your property. This means that you need to know how to act fast when roof leaks occur.

What Should You Do?

The biggest question that property owners have when they are dealing with a roof leak is how the situation should be corrected. Some property owners assume that they have the ability to fix the leak on their roof on their own. This is an option, but it is not ideal. This means that before you try to fix your roof leak on your own, it is best to call a roofing repair contractor that knows how to get the job done.

Here are the two biggest reasons why calling a roofer is the best decision that you can make, when you are dealing with a leaking roof:

Safety Should be a Priority

One of the biggest benefits to choosing a roofing professional when you are dealing with a leaking roof is the ability to maintain safety at all times. Trying to climb to the top of your roof on your own and deal with a leaky roof is not the safest option for you. You most likely do not have the experience or the equipment that is required to ensure that safety is maintained during the roof repair process. A professional roofing contractor has seen it and done it before, which means that they are qualified to take on the job.

Save Yourself the Hassle – Not Dollars

If you really want to make things simpler, it is a good idea to call a roofing professional at the first sign of a leak. Get it done right the first time. Trying to deal with it on your own may well cost you more time and money in the long run. You can get the issue corrected the right way, in the shortest amount of time, if you just call “the guy” right away.

 

Metal Roofing- Designed To Last a Lifetime

Metal Roofing- Designed To Last a Lifetime

Replacing a roof is costly and fraught with problems. Every building/home owner prefers a roofing system that has the longest interval between re-roofings. A metal roofing system has the longest lifespan among all roofing systems available today, although the initial installation cost can be a limiting factor. Metal roofs have been in existence since a long time and are now available in an extensive variety of beautiful designs and colors. Advancement in technology has enabled metal roofs to be the best choice among all types, suitable for residential and commercial/industrial buildings as well. They can be designed to suit all types of architecture and complement many buildings that incorporate some of the most complex architectural designs.

Metal roofing products are made to resemble traditional roofing products like wood shakes shingles, asphalt shingles etc. They are very durable and can withstand all type of weather conditions like heavy snow, wind driven rains, hurricane force winds, hail and extreme heat. The metals used in the manufacture of metal roofs are tin, steel, aluminum and copper. roofing products made from these metals are warp, split and rot resistant. They do not gather mold as traditional asphalt tile roofs do. Properly installed metal roofs are highly resistant to wind damage. For roof surfaces at very steep angles, these roofing products can be used to create a vertical siding that can appear very attractive, when color coordinated with the rest of the roofing.

All metal roofing products whether made from steel, aluminum or copper usually last as long as the building, when they are installed. Someone intending to stay in the house for a short while only may not be able to realize the savings in costs that would accrue substantially, otherwise over the long years. However, for someone staying in the house for a long time, installing a metal roof will prove to be a sound investment.

Metal roofs come with a reflective coating for protection from UV rays. It also reflects heat from sunlight to make the house energy efficient. A substantial saving in electrical bills is possible, when a metal roof is installed in a building. On the other hand in winter, when there is snowfall, the exposed surface of a metal roof will heat up quickly to melt accumulated snow, keeping the roof clear. However, the drumming noise of rain or hail beating on a metal roof can be unnerving during a heavy downpour or a hailstorm. It is possible to reduce this problem by using one of the various insulating products available in the market.

Metal roofs are given a class A fire rating due to their excellent fire resistant properties. However, since it is possible to install metal roofs without removing the previous roofing, many people install them over existing asphalt or other type of roofs. In such a case, if the earlier roof is of combustible material, it could burn to generate enough heat to melt the metal roofing on top.

Metal roofing products come in a variety of appealing colors, shades and textures to complement the color scheme and design of any building including industrial sheds and warehouses. Technological innovations have made these products retain their original look and color, even after decades of use.

 

Why Metal Roofing Is Attractive For Several Reasons

Why Metal Roofing Is Attractive For Several Reasons

If you are wanting to understand the options available to you with regards to roofing materials, you can check out metal roofing. More and more homeowners that are hoping to create a particular look to stand the test of time are recognizing the benefits of a metal roofing. It is helpful to comprehend some of the features of a metal roof before making a determination of which roofing material to go with on your own home.

roofing replacements and pricey repairs often are the outcome of severe weather that has weakened the existing roof. Many roofing companies recommend using a normal asphalt shingle when facing a total roof replacement. Because asphalt roofing is regarded as the common roofing material, people may think it’s the best choice for their home. But they may be surprised to learn that the average lifetime of an asphalt roof is only fifteen years with regards to the local climate and pitch of the roof structure. On the other hand, metal roofs offer consumers between twice and three times the lifetime longevity! That means peace of mind about your roof for decades to come.

You might have other concerns about a metal roof top, even though the durability is much better. Can a metal roof truly look great? For friends and friends, the roof plays a huge role in first impressions and you will want one that looks great. The fact of the matter is that a metal roofing has many cosmetic benefits and can enhance the appearance of any home favorably. Today’s metal roofing supplies are available in a variety of stunning, custom styles. A pre-painted or press formed panel is one of the more popular selections for residential rooftops. Produced to look like tile, slate or wood shingles, these systems maintain durability and the metal gives a beautiful visual appearance.

Another dilemma you could have is the potential noise a metal roofing will make during a rainstorm. Anybody who has stood under a piece of metal when it was raining knows it’s not exactly noiseless! With regards to these metal roofs however, this is not the case as modern technology has successfully eliminated this problem. When it comes to installing a metal roof on a home, professional roofing companies will determine the right primary layer to be installed, removing the noise concern. Studies have shown that a accurately installed metal roof will not generate any more noise inside than a common asphalt roof.

There are a few other advantages to take into account if you’re looking for a metal roof. One is the direct environmental benefit. Roughly 25% of recycled material is used in the production process of metal roofing, which is higher than that of asphalt. Yearly in the United States, billions of pounds of shingles made of asphalt find their way straight into land fills. This is an enormous problem that can be greatly decreased through the choice of metal roof coverings. Since they are environmentally friendly, many states offer tax credits for those people that choose to install a metal roof as opposed to using some other form of roofing material. Rate reductions are also being offered by a lot of insurance companies as well.

Metal roofing really might be an excellent fit, whether you are trying to be more eco-friendly or are going for a more durable yet attractive look. Roof replacement is not a straightforward process as a lot of people dread even thinking about it. That’s exactly why it’s important to look for roofing companies who offer experience and options in metal roof coverings that will meet your home’s needs for years to come!